IF YOU DO NOT USE THE FILTER FOR THE GAS DETECTOR, WILL IT HAVE ANY EFFECTS ON THE DEVICE?
✨ Of course, if you do not use, or do not replace, the filter for the gas detector, it will greatly affect the service life and measurement results of the device.
💥 The filter helps removing impurities from the air entering the sensor. This keeps the sensor clean and does not reduce the area exposed to the gas.
💥 The filter also helps eliminating "intrusive" water vapors, leaving the sensor clean and undamaged by water.
💥 In addition, with absorption-type gas detectors using a suction pump, the filter helps preventing the suction pump from being clogged.
How often should the filter be changed?
🔥 Normally, you will need to change the filter every 6 - 12 months, depending on the usage and environments that the device was exposed to. However, the device should also be monitored and the filter changed sooner if:
👉 The device often works in dusty environments. 👉 The device often works in humid and steamy environments. 👉 The device works in environments that are dusty, steamy and humid at the same time. 👉 The device encounters objective causes that make the filter wet and dirty
💯 The filter in the gas detector plays an important role in the operation of the device. Therefore, you should also pay attention to it instead of just paying attention to other materials.
❤️ Don't forget to follow RIKEN VIET's Fanpage for more useful information about gas detectors!
———————–
RIKEN VIET GAS DETECTOR TECHNOLOGY CO., LTD
🏢 79/1 Ly Chinh Thang St., Vo Thi Sau Ward, District 3, Ho Chi Minh City
📞 0961 55 69 05
📩 info@rikenviet.vn
🌐 https://rikenviet.vn/
#RikenViet #RikenKeiki #may_do_khi #hethongdokhi #khuyenmaicuoinam #antoanlaodong
